Uninterruptible power supply APC SMART-UPS 3000VA LCD RM 2U 230V

SMT3000RMI2UNCFeatures

APC Smart-UPS 3000VA LCD RM 2U 230V with Network Card

• Adjustable voltage sensitivity
  Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
• Adjustable voltage-transfer points
  Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
• Audible alarms
  Provides notification of changing utility power and UPS power conditions
• Automatic restart of loads after UPS shutdown
  Automatically starts up the connected equipment upon the return of utility power.
• Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.
• Battery failure notification
  Provides early-warning fault analysis on batteries enabling timely preventive maintenance
• Boost and Trim Automatic Voltage Regulation (AVR)
  Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
• Cold-start capable
  Provides temporary battery power when the utility power is out.
• Disconnected battery notification
  Warns when a battery is not available to provide backup power.
• Energy meter
  Provides actual kilowatt hours of usage for energy conscious users.
• Frequency and voltage regulation
  Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
• Green mode
  Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
• High online efficiency
  Reduces utlility costs, generates less heat.
• Hot-swappable batteries
  Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
• Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.
• Intuitive LCD interface
  Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
• LED Indicators
  Provide easy-to-read status of the unit and utility power conditions.
• Network manageable
  Provides remote power management of the UPS over the network.
• Outlet group control
  Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).
• Predicitive failure notification
  Provides early-warning fault analysis ensuring proactive component replacement.
• Predictive replace battery date
  Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
• Preinstalled network management card
  Provides for remote management and control of the UPS over a network out of the box.
• Pure sine wave output on battery
  Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
• Safety-agency approved
  Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
• Sequenced network shutdown and reboot
  Customize network shutdown and reboot sequence of connected servers and UPSs.
• Serial connectivity
  Provides management of the UPS via a serial port.
• Single switched outlet group
  Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
• SmartSlot
  Customize UPS capabilities with management cards.
• StruxureWare Data Center Expert compatible
  Enables centralized management via StruxureWare Data Center Expert.
• Temperature-compensated battery charging
  Prolongs battery life by regulating the charge voltage according to battery temperature.
• USB connectivity
  Provides management of the UPS via a USB port (not available on all models).
• User-replaceable batteries
  Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
• Wide input voltage range
  Designed for harsh electrical environments to save battery life.

Smart-UPSFeatures & Benefits

Safety

• Safety-agency approved
  Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Adaptability

• Adjustable voltage-transfer points
  Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
• Adjustable voltage sensitivity
  Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Availability

• Automatic restart of loads after UPS shutdown
  Automatically starts up the connected equipment upon the return of utility power.
• Intelligent battery management
  Maximizes battery performance, life, and reliability through intelligent, precision charging.
• Boost and Trim Automatic Voltage Regulation (AVR)
  Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
• Temperature-compensated battery charging
  Prolongs battery life by regulating the charge voltage according to battery temperature.
• Power conditioning
  Protects connected loads from surges, spikes, lightning, and other power disturbances.
• Disconnected battery notification
  Warns when a battery is not available to provide backup power.
• Automatic self-test
  Periodic battery self-test ensures early detection of a battery that needs to be replaced.